Introduction

Welcome to www.moderninnovations.co.zw. These terms describe the terms and conditions applicable to your access and use of the website www.moderninnovations.co.zw (the “Site”), and any other websites, features, applications, widgets or online services that are owned or controlled by Modern Innovations Marketing (Pvt) Ltd (together with the Site, the “Services”).  This document is a legally binding agreement between you as the user(s) of the Site (hereinafter referred to as “you”, “your” or “User”) and the Modern Innovations Marketing (Pvt) Ltd, an entity listed in clause 2.1 below, (hereinafter referred to as “we”, “our” or “Modern Innovations”).

1. Application and Acceptance of the Terms

  • Your use of the Site and Modern Innovations’ Services, software and products (collectively the as the “Services” hereinafter) is subject to the terms and conditions contained in this document as well as the Privacy Policy and any other rules and policies of the Site that Modern Innovations may publish from time to time. This document and such other rules and policies of the Site are collectively referred to below as the “Terms”.  By accessing the Site or using the Services, you agree to accept and be bound by the Terms.  Please do not use the Services or the Site if you do not accept all of the Terms.
    • You may not use the Services and may not accept the Terms if
      1. You are not of legal age of 18 years to form a binding contract with Modern Innovations Marketing (Pvt) Ltd, or
      2. You are not permitted to receive any Services under the laws of Zimbabwe or other countries/regions including the country/region in which you are resident or from which you use the Services.
    • You acknowledge and agree that Modern Innovations may amend any Terms at any time by posting the relevant amended and restated Terms on the Site.  By continuing to use the Services or the Site, you agree that the amended Terms will apply to you.
    • You may be required to enter into a separate agreement, whether online or offline, with Modern Innovations or our affiliate for any Service (“Additional Agreements”).  If there is any conflict or inconsistency between the Terms and an Additional Agreement, the Additional Agreement shall take precedence over the Terms only in relation to that Service concerned.
    • The Terms may not otherwise be modified except in writing by an authorized officer of Modern Innovations.

2. Provision of Services

  • The contracting entity that you are contracting with is Modern Innovations Marketing (Pvt) Ltd, a company registered in Zimbabwe with Company Reg. No. 790/2017.
  • You may be required to register as a member either on the Site on other Services in order to access and use some Services. Further, Modern Innovations reserves the right, without prior notice, to restrict access to or use of certain Services (or any features within the Services) to paying Users or subject to other conditions that Modern Innovations may impose in our discretion. 
  • Services (or any features within the Services) may vary for different regions and countries. No warranty or representation is given that a particular Service or feature or function thereof or the same type and extent of the Service or features and functions thereof will be available for Users. Modern Innovations may in our sole discretion limit, deny or create different level of access to and use of any Services (or any features within the Services) with respect to different Users.
  • Modern Innovations may launch, change, upgrade, impose conditions to, suspend, or stop any Services (or any features within the Services) without prior notice except that in case of a fee-based Service, such changes will not substantially adversely affect the paying Users in enjoying that Service.
  • Some Services may be provided by Modern Innovations’ affiliates on behalf of Modern Innovations.

3. Users Generally

  •  As a condition of your access to and use of the Site or Services, you agree that you will comply with all applicable laws and regulations when using the Site or Services.
  • You agree to use the Site or Services solely for your own private and internal purposes. You agree that
  •  You will not copy, reproduce, download, re-publish, sell, distribute or resell any Services or any information, text, images, graphics, video clips, sound, directories, files, databases or listings, etc available on or through the Site (the “Site Content”), and
  • You will not copy, reproduce, download, compile or otherwise use any Site Content for the purposes of operating a business that competes with Modern Innovations, or otherwise commercially exploit the Site Content. Systematic retrieval of Site Content from the Site to create or compile, directly or indirectly, a collection, compilation, database or directory (whether through robots, spiders, automatic devices or manual processes) without written permission from Modern Innovations is prohibited. Use of any content or materials on the Site for any purpose not expressly permitted in the Terms is prohibited.
  • You must read Modern Innovations’ Privacy Policy which governs the protection and use of personal information about Users in the possession of Modern Innovations and our affiliates. You accept the terms of the Privacy Policy and agree to the use of the personal information about you in accordance with the Privacy Policy.
  • Modern Innovations may allow Users access to content, products or services offered by third parties through hyperlinks (in the form of word link, banners, channels or otherwise), API or otherwise to such third parties’ websites. You are cautioned to read such websites’ terms and conditions and/or privacy policies before using the sites. You acknowledge that Modern Innovations has no control over such third parties’ websites, does not monitor such websites, and shall not be responsible or liable to anyone for such websites, or any content, products or services made available on such websites.
  • You agree not to undertake any action to undermine the integrity of the computer systems or networks of Modern Innovations and/or any other User nor to gain unauthorized access to such computer systems or networks.
  • You agree not to undertake any action which may undermine the integrity of Modern Innovations’ feedback system, such as leaving positive feedback for yourself using secondary Member IDs or through third parties or by leaving unsubstantiated negative feedback for another User.
  • By posting or displaying any information, content or material (“User Content”) on the Site or providing any User Content to Modern Innovations or our representative(s), you grant an irrevocable, perpetual, worldwide, royalty-free, and sub-licensable (through multiple tiers) license to Modern Innovations to display, transmit, distribute, reproduce, publish, duplicate, adapt, modify, translate, create derivative works, and otherwise use any or all of the User Content in any form, media, or technology now known or not currently known in any manner and for any purpose which may be beneficial to the operation of the Site, the provision of any Services and/or the business of the User. You confirm and warrant to Modern Innovations that you have all the rights, power and authority necessary to grant the above license.

4. Member Accounts

  • User may be required to register on the Site or on other Services to access or use some Services (a registered User is also referred to as a “Member” below). Except with Modern Innovations’ approval, one User may only register a one-member account on the Site or per Service. Modern Innovations may cancel or terminate a User’s member account if Modern Innovations has reasons to suspect that the User has concurrently registered or controlled two or more-member accounts. Further, Modern Innovations may reject User’s application for registration for any reason.
  • Upon registration on the Site or other Services, Modern Innovations shall assign an account and issue a member ID and password (the latter shall be chosen by a registered User during registration) to each registered User.
  • A set of Member ID and password is unique to a single account. Each Member shall be solely responsible for maintaining the confidentiality and security of your Member ID and password and for all activities that occur under your account. No Member may share, assign, or permit the use of your Member account, ID or password by another person outside of the Member’s own business entity. Member agrees to notify Modern Innovations immediately if you become aware of any unauthorized use of your password or your account or any other breach of security of your account.
  • Member agrees that all activities that occur under your account (including without limitation, posting any company or product information, clicking to accept any Additional Agreements or rules, subscribing to or making any payment for any services, sending emails using the email account or sending SMS) will be deemed to have been authorized by the Member.
  • Member acknowledges that sharing of your account with other persons or allowing multiple users outside of your business entity to use your account (collectively, “multiple uses”), may cause irreparable harm to Modern Innovations or other Users of the Site. Member shall indemnify Modern Innovations, our affiliates, directors, employees, agents and representatives against any loss or damages (including but not limited to loss of profits) suffered as a result of the multiple uses of your account. Member also agrees that in case of the multiple uses of your account or Member’s failure to maintain the security of your account, Modern Innovations shall not be liable for any loss or damages arising from such a breach and shall have the right to suspend or terminate Member’s account without liability to Member.

5. Member’s Responsibilities

  • Each Member represents, warrants and agrees that
  • You have full power and authority to accept the Terms, to grant the license and authorization and to perform the obligations hereunder;
  • You use the Site and Services for business purposes only; and
  • The address you provide when registering is the principal place of business of your business entity.  For purposes of this provision, a branch or liaison office will not be considered a separate entity and your principal place of business will be deemed to be that of your head office. 
  • Member will be required to provide information or material about your entity, business or products/services as part of the registration process on the Site or your use of any Service or the member account.  Each Member represents, warrants and agrees that
  • Such information and material whether submitted during the registration process or thereafter throughout the continuation of the use of the Site or Service is true, accurate, current and complete, and
  • You will maintain and promptly amend all information and material to keep it true, accurate, current and complete.
  • Upon becoming a Member, you consent to the inclusion of the contact information about you in our Member Database and authorize Modern Innovations and our affiliates to share the contact information with other Users or otherwise use your personal information in accordance with the Privacy Policy
  • Each Member represents, warrants and agrees that
    • You shall be solely responsible for obtaining all necessary third-party licenses and permissions regarding any User Content that you submit, post or display;
    • Any User Content that you submit, post or display does not infringe or violate any of the copyright, patent, trademark, trade name, trade secrets or any other personal or proprietary rights of any third party (“Third Party Rights”);
    • You have the right and authority to sell, trade, distribute or export or offer to sell, trade, distribute or export the products or services described in the User Content and such sale, trade, distribution or export or offer does not violate any Third-Party Rights and
    • You and your affiliates are not the subjects of any trade restrictions, sanctions or other legal restrictions enacted by any country, international organization or jurisdiction.
  • Each Member further represents, warrants and agrees that the User Content that you submit, post or display shall:
    •  be true, accurate, complete and lawful;
    •  not be false, misleading or deceptive;
    •  not contain information that is defamatory, libellous, threatening or harassing, obscene, objectionable, offensive, sexually explicit or harmful to minors;
    •  not contain information that is discriminatory or promotes discrimination based on race, sex, religion, nationality, disability, or age;
    •  not violate the other Terms or any applicable Additional Agreements
    •  not violate any applicable laws and regulations (including without limitation those governing export control, consumer protection, unfair competition, or false advertising) or promote any activities which may violate any applicable laws and regulations;
    •  not contain any link directly or indirectly to any other websites which include any content that may violate the Terms.
  • Each Member further represents, warrants and agrees that you shall/are:
    •  carry on your activities on the Site in compliance with any applicable laws and regulations;
    •  conduct your business transactions with other users of the Site in good faith;
    •  carry on your activities in accordance with the Terms and any applicable Additional Agreements;
    •  not use the Services or Site to defraud any person or entity (including without limitation sale of stolen items, use of stolen credit/debit cards);
    •  not impersonate any person or entity, misrepresent yourself or your affiliation with any person or entity;
    •  not engage in spamming or phishing;
    •  not engage in any other unlawful activities (including without limitation those which would constitute a criminal offence, give rise to civil liability, etc.) or encourage or abet any unlawful activities;
    •  not involve attempts to copy, reproduce, exploit or expropriate Modern Innovations’ various proprietary directories, databases and listings;
    •  not involve any computer viruses or other destructive devices and codes that have the effect of damaging, interfering with, intercepting or expropriating any software or hardware system, data or personal information;
    •  not involve any scheme to undermine the integrity of the data, systems or networks used by Modern Innovations and/or any user of the Site or gain unauthorized access to such data, systems or networks;
    •  not, and your director(s), officer(s), controlling party/ies, affiliates and legal jurisdiction in which any of the foregoing persons or entities are organized or has operations are not, persons or entities that are subject to any economic or fraud sanctions of any governmental, international or regulatory entities; and
    •  not engage in any activities that would otherwise create any liability for Modern Innovations or our affiliates
  • Member may not use the Services and member account to engage in activities which are identical or similar to Modern Innovations’ business.
  • If Member provides a business referee, Member represents, warrants and agrees that you have obtained all necessary consents, approvals and waivers from your business partners and associates to
    •  act as your business referee;
    •  post and publish their contact details and information, reference letters and comments on their behalf; and
    • that third parties may contact such business referees to support claims or statements made about you. You further warrant and agree that all reference letters and comments are true and accurate, and third parties may contact the business referees without the need to obtain your consent.
  • Member agrees to provide all necessary information, materials and approval, and render all reasonable assistance and cooperation necessary for Modern Innovations’ provision of the Services, evaluating whether Member has breached the Terms and/or handling any complaint against the Member.  If Member’s failure to do so results in delay in, or suspension or termination of, the provision of any Service, Modern Innovations shall not be obliged to extend the relevant service period nor shall be liable for any loss or damages arising from such delay, suspension or termination.
  • Member acknowledges and agrees that Modern Innovations shall not be required to actively monitor nor exercise any editorial control whatsoever over the content of any message or material or information created, obtained or accessible through the Services or Site. Modern Innovations does not endorse, verify or otherwise certify the contents of any comments or other material or information made by any Member. Each Member is solely responsible for the contents of their communications and may be held legally liable or accountable for the content of their comments or other material or information
  • Member acknowledges and agrees that the Services may only be used by businesses and their representatives for business use and not for individual consumers or for personal use.
  • Member acknowledges and agrees that each Member is solely responsible for observing applicable laws and regulations in its respective jurisdictions to ensure that all use of the Site and Services are in compliance with the same.

6. Breaches by Members

  • Modern Innovations reserves the right in our sole discretion to remove, modify or reject any User Content that you submit to, post or display on the Site which we reasonably believe is unlawful, violates the Terms, could subject Modern Innovations or our affiliates to liability or is otherwise found inappropriate in Modern Innovations’ opinion.
  • If any Member breaches any Terms, or if Modern Innovations has reasonable grounds to believe that a Member is in breach of any Terms, Modern Innovations shall have the right to take such disciplinary actions as it deems appropriate, including without limitation:
    • suspending or terminating the Member’s account and any and all accounts determined to be related to such account by Modern Innovations in its discretion;
    • restricting, downgrading, suspending or terminating the subscription of, access to, or current or future use of any Service;
    • removing any product listings or other User Content that the Member has submitted, posted or displayed, or imposing restrictions on the number of product listings or User Content that the Member may post or display;
    • imposing other restrictions on the Member’s use of any features or functions of any Service as Modern Innovations may consider appropriate in its sole discretion; and
    • any other corrective actions, discipline or penalties as Modern Innovations may deem necessary or appropriate in its sole discretion
  • Without limiting the generality of the provisions of the Terms, a Member would be considered as being in breach of the Terms in any of the following circumstances:
    • upon complaint or claim from any third party, Modern Innovations has reasonable grounds to believe that such Member has wilfully or materially failed to perform your contract with such third party including without limitation where the Member has failed to deliver any items ordered by such third party after receipt of the purchase price, or where the items Member has delivered materially fail to meet the terms and descriptions outlined in your contract with such third party,
    • Modern Innovations has reasonable grounds to suspect that such Member has used a stolen credit card or other false or misleading information in any transaction with a counter party,
    • Modern Innovations has reasonable grounds to suspect that any information provided by the Member is not current or complete or is untrue, inaccurate, or misleading, or
    • Modern Innovations believes that the Member’s actions may cause financial loss or legal liability to Modern Innovations or our affiliates or any other Users.
  • Modern Innovations reserves the right to cooperate fully with governmental authorities, private investigators and/or injured third parties in the investigation of any suspected criminal or civil wrongdoing.  Further, Modern Innovations may disclose the Member’s identity and contact information, if requested by a government or law enforcement body, an injured third party, or as a result of a subpoena or other legal action. Modern Innovations shall not be liable for damages or results arising from such disclosure, and Member agrees not to bring any action or claim against Modern Innovations for such disclosure.
  • If a Member is in breach of the Terms, Modern Innovations also reserves the right to publish the records of such breach on the Site.  If such breach involves or is reasonably suspected of involving dishonest or fraudulent activities, Modern Innovations also reserves the right to disclose the records of such breach to our affiliates. Such Modern Innovations affiliates may impose limitation on, suspend or terminate the Member’s use of all or part of the services provided by such affiliates to the Member, take other remedial actions, and publish the records about the Member’s breach of the Terms on the websites operated by or controlled by such Modern Innovations affiliates.
  • Modern Innovations may, at any time and in our reasonable discretion, impose limitations on, suspend or terminate the Member’s use of any Service or the Site without being liable to the Member if Modern Innovations has received notice that the Member is in breach of any agreement or undertaking with any affiliate of Modern Innovations and such breach involves or is reasonably suspected of involving dishonest or fraudulent activities.  Modern Innovations shall have the right to publish the records of such breach on the Site.  Modern Innovations shall not be required to investigate such breach or request confirmation from the Member.
  • Each Member agrees to indemnify Modern Innovations, our affiliates, directors, employees, agents and representatives and to hold them harmless, from any and all damages, losses, claims and liabilities (including legal costs on a full indemnity basis) which may arise from your submission, posting or display of any User Content, from your use of the Site or Services, or from your breach of the Terms.
  • Each Member further agrees that Modern Innovations is not responsible and shall have no liability to you or anyone else for any User Content or other material transmitted over the Site, including fraudulent, untrue, misleading, inaccurate, defamatory, offensive or illicit material and that the risk of damage from such material rests entirely with each Member. Modern Innovations reserves the right, at our own expense, to assume the exclusive defence and control of any matter otherwise subject to indemnification by the Member, in which event the Member shall cooperate with Modern Innovations in asserting any available defences.

7. Limitation of Liability

  • TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SERVICES PROVIDED BY MODERN INNOVATIONS ON OR THROUGH THE SITE ARE PROVIDED “AS IS”, “AS AVAILABLE” AND “WITH ALL FAULTS”, AND MODERN INNOVATIONS HEREBY EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY WARRANTIES OF CONDITION, QUALITY, DURABILITY, PERFORMANCE, ACCURACY, RELIABILITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALL SUCH WARRANTIES, REPRESENTATIONS, CONDITIONS, AND UNDERTAKINGS ARE HEREBY EXCLUDED.
  • TO THE MAXIMUM EXTENT PERMITTED BY LAW, MODERN INNOVATIONS MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE VALIDITY, ACCURACY, CORRECTNESS, RELIABILITY, QUALITY, STABILITY, COMPLETENESS OR CURRENTNESS OF ANY INFORMATION PROVIDED ON OR THROUGH THE SITE; MODERN INNOVATIONS DOES NOT REPRESENT OR WARRANT THAT THE MANUFACTURE, IMPORTATION, EXPORT, DISTRIBUTION, OFFER, DISPLAY, PURCHASE, SALE AND/OR USE OF PRODUCTS OR SERVICES OFFERED OR DISPLAYED ON THE SITE DOES NOT VIOLATE ANY THIRD PARTY RIGHTS, AND MODERN INNOVATIONS MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING ANY PRODUCT OR SERVICE OFFERED OR DISPLAYED ON THE SITE.
  • The Site may make available to User services or products provided by independent third parties.   No warranty or representation is made with regard to such services or products.   In no event shall Modern Innovations and our affiliates be held liable for any such services or products.
  • Each User hereby agrees to indemnify and save Modern Innovations, our affiliates, directors, officers and employees harmless, from any and all losses, claims, liabilities (including legal costs on a full indemnity basis) which may arise from such User’s use of the Site or Services (including but not limited to the display of such User’s information on the Site) or from your breach of any of the terms and conditions of the Terms. Each User hereby further agrees to indemnify and save Modern Innovations, our affiliates, directors, officers and employees harmless, from any and all losses, damages, claims, liabilities (including legal costs on a full indemnity basis) which may arise from User’s breach of any representations and warranties made by User to Modern Innovations, including but not limited to those set forth in Section 5 hereunder.  
  • Each User hereby further agrees to indemnify and save Modern Innovations, our affiliates, directors, officers and employees harmless, from any and all losses, damages, claims, liabilities (including legal costs on a full indemnity basis) which may arise, directly or indirectly, as a result of any claims asserted by Third Party Rights claimants or other third parties relating to third-party products offered or displayed on the Site. Each User hereby further agrees that Modern Innovations is not responsible and shall have no liability to you, for any material posted by others, including defamatory, offensive or illicit material and that the risk of damages from such material rests entirely with each User. Modern Innovations reserves the right, at our own expense, to assume the exclusive defence and control of any matter otherwise subject to indemnification by you, in which event you shall cooperate with Modern Innovations in asserting any available defences.
  • Modern Innovations shall not be liable for any special, direct, indirect, punitive, incidental or consequential damages or any damages whatsoever (including but not limited to damages for loss of profits or savings, business interruption, loss of information), whether in contract, negligence, tort, equity or otherwise or any other damages resulting from any of the following.
    • the use or the inability to use the Site or Services;
    • any defect in third-party goods, samples, data, information or services purchased or obtained from a User or any other third party through the Site;
    • violation of Third Party Rights or claims or demands that User’s manufacture, importation, export, distribution, offer, display, purchase, sale and/or use of products or services offered or displayed on the Site may violate or may be asserted to violate Third Party Rights; or claims by any party that they are entitled to defence or indemnification in relation to assertions of rights, demands or claims by Third Party Rights claimants;
    • unauthorized access by third parties to data or private information of any User;
    • statements or conduct of any User of the Site; or;
    • any matters relating to Services however arising, including negligence.
  • Notwithstanding any of the foregoing provisions, the aggregate liability of Modern Innovations, our employees, agents, affiliates, representatives or anyone acting on our behalf with respect to each User for all claims arising from the use of the Site or Services during any calendar year shall be limited to the greater of
    • the amount of fees the User has paid to Modern Innovations or our affiliates during the calendar year and
    • the maximum amount permitted in the applicable law. The preceding sentence shall not preclude the requirement by the User to prove actual damages. All claims arising from the use of the Site or Services must be filed within one (1) year from the date the cause of action arose or such longer period as prescribed under any applicable law governing this Term of Use.
  • The limitations and exclusions of liability to you under the Terms shall apply to the maximum extent permitted by law and shall apply whether or not Modern Innovations has been advised of or should have been aware of the possibility of any such losses arising.

8. Force Majeure

  • Under no circumstances shall Modern Innovations be held liable for any delay or failure or disruption of the content or services delivered through the Site resulting directly or indirectly from acts of nature, forces or causes beyond our reasonable control, including without limitation, Internet failures, computer, telecommunications or any other equipment failures, electrical power failures, strikes, labour disputes, riots, insurrections, civil disturbances, shortages of labour or materials, fires, flood, storms, explosions, acts of God, war, governmental actions, orders of domestic or foreign courts or tribunals or non-performance of third parties.

9. Intellectual Property Rights

  • Modern Innovations is the sole owner or lawful licensee of all the rights and interests in the Site and the Site Content. The Site and Site Content embody trade secrets and other intellectual property rights protected under worldwide copyright and other laws. All title, ownership and intellectual property rights in the Site and Site Content shall remain with Modern Innovations, our affiliates or licensors of the Site Content, as the case may be. All rights not otherwise claimed under the Terms or by Modern Innovations are hereby reserved.
  • Modern Innovations may have independent third parties involved in the provision of the Services (e.g., the authentication and verification service providers).  You may not use any trademark, service mark or logo of such independent third parties without prior written approval from such parties.

10. Notices

  1. All legal notices or demands to or upon Modern Innovations shall be made in writing and sent to Modern Innovations personally, by courier, certified mail to the following entity and address: Modern Innovations Marketing (Pvt) Ltd, 3019 Empumalanga, Phase 4, Hwange, Attn: Legal Department or via email to admin@moderninnovations.co.zw. The notices shall be effective when they are received by Modern Innovations in any of the above-mentioned manners.
  2. All legal notices or demands to or upon a User shall be effective if either delivered personally, sent by courier, certified mail, by facsimile or email to the last-known correspondence, fax or email address provided by the User to Modern Innovations, or by posting such notice or demand on an area of the Site that is publicly accessible without a charge. Notice to a User shall be deemed to be received by such User if and when.
    1. Modern Innovations is able to demonstrate that communication, whether in physical or electronic form, has been sent to such User, or
    2. immediately upon Modern Innovations posting such notice on an area of the Site that is publicly accessible without charge.
  3. You agree that all agreements, notices, demands, disclosures and other communications that Modern Innovations sends to you electronically satisfy the legal requirement that such communication should be in writing.

11. General Provisions

  1. Subject to any Additional Agreements, the Terms constitute the entire agreement between you and Modern Innovations with respect to and govern your use of the Site and Services, superseding any prior written or oral agreements in relation to the same subject matter herein.
  2. Modern Innovations and you are independent contractors, and no agency, partnership, joint venture, employee-employer or franchiser-franchisee relationship is intended or created by the Terms.
  3. If any provision of the Terms is held to be invalid or unenforceable, such provision shall be deleted and the remaining provisions shall remain valid and be enforced.
  4. Headings are for reference purposes only and in no way define, limit, construe or describe the scope or extent of such section.
  5. Modern Innovations’ failure to enforce any right or failure to act with respect to any breach by you under the Terms will not constitute a waiver of that right nor a waiver of Modern Innovations’ right to act with respect to subsequent or similar breaches.
  6. Modern Innovations shall have the right to assign the Terms (including all of our rights, titles, benefits, interests, and obligations and duties in the Terms to any person or entity (including any affiliates of Modern Innovations). You may not assign, in whole or part, the Terms to any person or entity.
  7. The Terms shall be governed by the laws of the Republic of Zimbabwe.